제품명 Spigot Closure, white PP lock nut(NA®6423)
모델명 NA-6423
PP재질,PP spigot and screw closure,TPE gasket/Autoclavable
CODE 품명 재고 구매수량 단위 판매가격
NA-6423-0010 Spigot Closure, white PP lock nut(NA®6423) :: PP lock nut,TPE plug 1 EA 37400

날젠하구병콕크 마개,PP재질(NALGENE®6423)

Nalgene* Spigot Closure for Nalgene Bottles, Jars, Carboys           

2018년 가격인상가 적용
 
 
Thermo Scientific* Nalgene Spigot Closure fits all Nalgene carboys with spigot and selected Nalgene tanks with spigot.
Use to replace the spigot to provide a leakproof seal when autoclaving liquids in a carboy. Also useful when handling could damage or accidentally turn on a spigot or when a spigot-less carboy is required. Included with all Nalgene carboys with spigot.
  • Closure keeps solutions safe by providing a leakproof seal when handling could damage or accidentally turn spigot on
  • Designed to fit Nalgene carboys, Clearboys, Lowboys and tanks that have a thread size of 1-1/8 in.', 12 male screw head
  • Autoclavable/Leakproof†


Nalgene LDPE, HDPE, PP and PMP containers can be used for long-term storage, but direct UV exposure should be avoided.
 

Cat. No.

Description

Material

단위

NA-6423-0010

Spigot Closure

PP lock nut,TPE plug

EA

 

Cat. No.

Description

Thread Size. In.

Qty
/Pack

Qty
/Cs.

NA-6423-0010

Spigot Closure
for Nalgene Bottles, Jars, Carboys

1-1/8in,
12 female screw thread

4

24

† The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following criteria:

  a) Bottle/flask/funnel closure systems with closures smaller than 100mm, after they are filled with water, inverted, withstand air pressure of 2psig for 2 minutes, and no water escapes;.
  b) Bottle/funnel/flask closure systems of larger than 100mm after they are filled with water, inverted for 15 minutes, and no water escapes.
Note: these tests, using other liquids, may not yield the same results. To ensure safe usage, customers are advised to test Thermo Scientific Nalgene bottles and closures under conditions of their planned applications. Thermo Scientific Nalgene products are leakproof at ambient temperature and pressure when used with their Nalgene closures.

   

※발주 전 견적문의하셔서 재고유무 확인 하세요.

     재고 없는 품목(Holding 예정이 없는 품목)은 수입발주 해야 하며,

     수입발주시에는 CASE단위로만 발주진행하며 75일~90일 정도 소요됩니다.



배 송  기 간

☞ 결제가 완료되면 다음날부터 2~3일 이내 전국(도서지방 및 사서함주소는 4~6일 소요)으로

     로젠택배를 통해서 배송됩니다.  (토, 일, 공휴일은 제외)

☞주문하신 상품에 따라 배송기간이 상이할 수 있으며 

    일시품절, 제조사의상품 수급문제 사유로 배송이 늦어지는 경우에는

    고객님께 메일이나 전화로 직접 연락을 드립니다.

배   송   비

☞초자류 2만원 이하는 주문및 배송이 안되니 충분한 양해 부탁드립니다.

☞5만원 이하는 착불로 발송되며,  5만원 이상 주문 상품에 대하여 무료 택배 배송을 원칙으로

    하고 있으니 참고해 주세요.

☞제주도와 울릉도는 운송료가 3300원 별도로 추가됩니다. 

☞택배외 퀵서비스로 급하게 받으셔야 할 경우는 고객님 부담입니다.

교환 및 반품

 

☞교환, 반품, 환불이 가능한 경우는

     배송 완료 후 7일 이내에 제품에 이상이 없는 경우, 

     제품을 개봉하지 않은 재판매가 가능한 상태이어야 하며,

     받으신 내용의 제품이 상이한 경우 교환 및 반품이 가능합니다.

☞교환, 반품, 환불이 불가능한 경우는

     발주시 수입발주 제품,  제품의 훼손, 제품고유박스의 훼손(낙서)으로 재판매가 불가능한 경우,

     배송받은 날로 부터 7일이 지난 제품,  주문제작건의 제품일 경우엔 교환 및 반품이 안됩니다.

     (모니터마다 각각의 색상차이가 있을 수 있으니,  미세한 색상차이는 하자가 안됩니다.)

☞교환, 반품, 환불의 경우

     저희 고객센타로 연락을 주시면 상담 후 처리를 해 드리겠습니다.

   T : 031-867-1426   F : 031-867-1464 

환          불

☞환불의 경우 신용카드 결제시는 신용카드 취소를

☞온라인 입금인 경우엔  주문자계좌번호를 알려주시면 3일내로 입금처리해 드립니다.

                                            


사이트명 : 한일랩테크 | 상호 : (주)한일랩테크 | 대표 : 한재근 | 전화 : 031-867-1426 | FAX : 031-867-1464
사업자등록번호 : 101-81-72408 | 통신판매신고 : 제 2012-경기양주-166 호 | 개인정보관리 책임자 : 김혜영
주소 : ( 우11435 ) 경기 양주시 평화로1677번길 26-38
Copyright ⓒ (주)한일랩테크 All Rights Reserved Any questions to hanillabtec@gmail.com
클릭하시면 이니시스 결제시스템의 유효성을 확인하실 수 있습니다.